The 180-VL comes with a Safe-T-Temp feature that assures a 180 degree final rinse and locks the machine into the wash cycle until the booster heater thermostat has been satisfied. The Ventless process eliminates the installation cost of a hood/fan, annual operational cost of the hood/fan, and hood ventilation system cost. Water entering the booster heater has been pre-heated, reducing the energy cost to bring booster temperature to required 120 degrees, potentially saving THOUSANDS of $ in operation costs. The CMA-180-Ventless is provided with “Door Safety Interlock”, to prevent operator from interrupting the ventless process that removes vapor from the machine. The 180-VL features a 17-1/2” dish clearance.
Features:
- Replaces need for independent vent hood
- Final rinse valve receives cold water (41-65°) that is processed through a “Heat Recover System” providing nearly cost-free heating capabilities for water supplied to the booster heater which reduces the heat recovery time for the booster heater
- Heat recovery system captures water vapor from the wash and rinse cycle then condenses it to heat the incoming cold water and evacuate the steam from the wash chamber
- Door-activated start
- Safe-T-Temp feature assures 180°F sanitizing rinse every cycle
- 12kW electrical booster heater
- Booster-safety thermostat
- 6kW wash tank heater
- Low max. 0.89 US gallons of water usage per rack
- Minimum 90-second cycle time (60 second wash/rinse and 30 second steam evacuation)
- 40 racks per hour (based on 90-second cycle)
- Fully automatic cycle for easy operation
- Water level safety control
- Maximum clearance for dishes is 17-1/2″
- All stainless steel construction
- Wash tank screens that filter recirculating wash water preventing soil from entering spray arms
- 3-door feature for straight or corner applications
- Automatic heat exchange condenser wash-down feature
- Rinse PRV supplied (pressure regulating valve)
- Field convertible from three phase to single phase
